Circular fixed parts & surface treatment series

    ------ Assembly fixed and surface treatment
    Provided for a variety of round parts fixative used for the assembly of coaxial parts, such as: bearings, gears, bushings, tubes, pulleys, cylinder gasket and transmission body. Enhance bearing performance of the cylinder body joints to reduce the mounting pressure and assembly costs.
    Products introduce list:
    609 - Low viscosity, high strength, suitable for the transition, interference or gap clearance fit. Retaining the key and shaft, bearings, small motors 
              rotor shaft, bushings,Improve the strength of press fit. Repair wear and tear holes in a shaft pieces or starting off parts.
    620 - High temperature resistance, high viscosity, high strength, and not flowing.
              Retention valve casing, core sets of injection molding machines, the valve cover, cylinder liner, keyways and other.
              The High temperature resistance of 225 centigrade degree, can prevent metal fretting and corrosion, Prevent leakage.
    638 - High intensity, the maximum temperature retention plastic.
              For dynamic load or the conditions of cyclic loading and retention with the gap of 0.25mm shaft and hole, fast
    641 - High Strength, Easy to disassemble, Easy to retaining the cylindrical mating parts.
              Especially suitable for the occasion requires frequent disassembly, apply to the
              Bearing assembly, the maximum diameter of the gap is 0.25mm.Moderate intensity
              is ideal for cylindrical parts that need to be open.
    648 - High strength, medium viscosity.
              Apply to the continuous operating temperature up to 1490C, the gap is less than under 0.152mm retention can be cured within 5 minutes
    660 - High viscosity.
              Apply to the damaged machine parts repair & solid hold, repair occlusal assembly operations.
    680 - High strength, medium viscosity.
              Clearance fit or transition with cooperates, Retention sleeve, pulleys, gears, rotor.
              Repair the hole, the shaft with the pieces, ultra-poor parts.
    712 - Instant glue common curing accelerator.
              Apply to the fast curing of the HAL-LOK instant glue.
    7387- Solvent basal dose. Promote to the HAL-LOK structural glues curing.
    7455 - Instant glue common curing accelerator.
              Applies to accelerate the curing of the all HAILOK instant glue, using first coated the better way.
    7649 - Solvent base agent.
              HAL-LOK anaerobic adhesive used to promote normal curing speed, but also to ensure that the non-active metal on the 
              surface of normal curing.
    768 - Instant glue to glue.
              Use for the surface excess of instant glue gets rid, applied to the surface clear of excess instant glue can be directly.
   755 - Natural environmentally friendly, waterless, CFC alkyl cleaning agent.
              Apply to the before assembly clean the oils, lubricants, cutting oil, sewerage of product surface.
   770 - Adhesion performance enhancers.
              Use for the surface of the polyolefin or other low energy surface material, need collocation with HAL-LOK instant glue.